3Com 3C840 manual Configuring IP Routing

Adding a Remote Site Profile		3 - 2
Modifying a Remote Site Profile		3 - 3
Deleting a Remote Site Profile		3 - 3
Configuring Network Service Information (PPP / RFC 1483 / RFC 1490) 3 - 4
Frame Relay 3 - 5
Configuring ATM Information	3	- 6
ATM Modify Screen 3 - 6
Configuring Protocol Parameters		3 - 8

Monitoring Remote Site Connections 3 - 8

4

CONFIGURING IP ROUTING

Introduction	4 - 1
Overview	4 - 1
Enabling IP Routing		4 - 2
Configuring IP for the LAN			4 - 2
Adding a Local IP Network				4 - 3
Resetting Parameters			4 - 4
Modifying or Deleting an IP Network						4 - 4
Configuring IP RIP on the LAN				4 - 5
Local Site (LAN) RIP		4 - 5
Advanced RIP Modification Options						4 - 5
Resetting Parameters			4 - 6
Configuring IP for the Remote Site Connection							4 - 7
Configuring IP Parameters for the Remote Site							4 - 7
Configure the Remote Site IP Network Information 4 - 8
Configuring IP RIP on a Remote Site					4 - 10
Configuring IP Static and Framed Routes						4 - 11
Adding a Static IP Route to the LAN						4 - 11
Adding a Framed IP Route to a Remote Site							4 - 11
Using IP Address Validation			4 - 12
MAC-Encapsulated Routing				4 - 13
Monitoring	4 - 14
IP Testing (PING) 4 - 14

Option 1: OfficeConnect Remote 840 Manager Ping to ISP or Remote Site Network 4 - 14