3Com 3C840 manual Dhcp Relay, Monitoring Dhcp, Dhcp Smart Mode, Dhcp Dhcp counters screen

7-4CHAPTER 7: CONFIGURING DHCP

Configuring the	If you selected Relay on the main DHCP screen, press the Configure
DHCP Relay	DHCP Relay button. This screen contains the following fields:

	Enter the IP Addresses of one or two remote DHCP servers and specify
	the Max Hops (the maximum number of hops through other routers) to
	reach them. Enable or disable the relay service to them as needed and
	press the Submit button.
Monitoring DHCP	The OfficeConnect Remote 840's monitoring capability allows you to
	display DHCP protocol counters and current lease information.
	To display the DHCP protocol counters, access the Monitor > Networks
	> DHCP > DHCP counters screen.
	To display the OfficeConnect Remote 840's DHCP Server lease table,
	access the Monitor > Networks > DHCP > DHCP leases screen.
DHCP Smart Mode	To simplify the installation/configuration process, the OfficeConnect
Overview	Remote 840 can be initialized with a set of pre-configured parameters.
	When the OfficeConnect Remote 840 is first booted in the DHCP Smart
	Mode, the following DHCP and DNS fields will be automatically
	configured: