3Com 3C840 manual Select the remote site to modify, and click Modify, Click Framed Services

Configuring IPX Static and Framed Services 9-9

Adding a Framed IPX To add, modify, or delete a framed service for a remote site:

Service to a Remote

Site (WAN)

1Select Configuration > Remote Sites (WAN).

2Select the remote site to modify, and click Modify.

3Continue clicking Next to advance through the ATM Modify, IP Modify, IP Advanced Modify screens to get to the IPX Modify screen.

4Click Framed Services.

5Click Add to define the following parameters:

■Server Name — The name of the remote server.

■Server Network Address — The network address of the remote server.

■Server Node Address — The node address of the remote server.

■Socket — The socket number on the remote server.

■Hops — The number of routers (1-15) the packets travel through before reaching their destination server.

■Server Type — You can either select the type of server the framed service is connected to, or enter a hex value for the server type.

6After you have entered the fields, click Submit.