4-12CHAPTER 4: CONFIGURING IP ROUTING

4Click Manage in the Framed Routes box.

5Click Add to define the following parameters:

Gateway (address) — The address of the neighbor router.

IP Route

Mask — The IP address for the mask.

Metric — The maximum number of routers (1-15) through which the data packets must travel before reaching their destination.

6After you have entered the fields, click Submit.

7Click Modify to change the fields, the Details button to view the fields, and the Delete button to erase the parameters you have set.

Using IP Address When IP Source Validation is enabled, the source address of all IP frames

Validationreceived from a remote site will be validated. A source address is valid if the OfficeConnect Remote 840 will route an IP frame destined to the source address on the same interface it came in on.

You need to access the IP Advanced Modify screen, by selecting Configuration > Remote Sites, selecting a remote site definition, and click Modify. Then keep clicking Next to advance through the screens until reaching the IP Advanced Modify screen, which contains the following fields:

Page 66
Image 66
3Com 3C840 manual IP Route