3Com 3C840 manual Enter the Dlci

E-8APPENDIX E: CONFIGURATION (NON-SETUP WIZARD) OF THE OFFICECONNECT REMOTE 840

■Enter the DLCI.

■Check the Enable Bridging and/or Enable MAC Encapsulated Routing boxes as needed.

If your unit is using ATM, the Remote Sites General Add screen will contain the following fields:

■Enter a name to identify the remote site.

■Set Network Service to PPP over Frame Relay or RFC 1483.

■If PPP, enter the Authentication Name and Authentication Password provided to you. You can change the header compression from the default of none to TCP/IP if you wish.

■Check the Enable Bridging and/or Enable MAC Encapsulated Routing boxes as needed.

2Click the Add button. This advances you to the ATM Modify screen.