Cisco Systems VC-289 Configuring a Dialing Prefix for Each Gateway, Command, Purpose, VC-323

Configuring H.323 Gatekeepers and Proxies

H.323 Gatekeeper Configuration Task List

Configuring a Dialing Prefix for Each Gateway

To configure a dialing prefix for each gateway, use the following commands beginning in global configuration mode:

	Command	Purpose
Step 1
	Router(config)# gatekeeper	Enters gatekeeper configuration mode.
Step 2
	Router(config-gk)# zone local	Specifies a zone controlled by a gatekeeper.
	gatekeeper-name domain-name	The arguments are as follows:
	[ras-IP-address]
		• gatekeeper-name—Specifies the gatekeeper name or zone name. This is
		usually the fully domain-qualified host name of the gatekeeper. For
		example, if the domain-nameis cisco.com, the gatekeeper-namemight be
		gk1.cisco.com. However, if the gatekeeper is controlling multiple zones,
		the gatekeeper-namefor each zone should be some unique string that has
		a mnemonic value.
		• domain-name—Specifies the domain name served by this gatekeeper.
		• ras-IP-address—(Optional) The IP address of one of the interfaces on the
		gatekeeper. When the gatekeeper responds to gatekeeper discovery
		messages, it signals the endpoint or gateway to use this address in future
		communications.
		Note Setting this address for one local zone makes it the address used for all
		local zones.

Cisco IOS Voice, Video, and Fax Configuration Guide

VC-323