Cisco Systems VC-289 Command, Purpose, “Configuring H.323 Users via RADIUS” section on, page

Configuring H.323 Gatekeepers and Proxies

H.323 Gatekeeper Configuration Task List

	Command	Purpose
Step 4
	Router(config)# radius-server host {host-name	Specifies the RADIUS server host.
	ip-address}[auth-portport-number][acct-port	For an explanation of the keywords and arguments,
	port-number] [timeout seconds] [retransmit retries]
	[key string]	see Step 3 in the configuration task table in the
		“Configuring H.323 Users via RADIUS” section on
		page 314.
Step 5
	Router(config)# radius-server key {0 string 7	Sets the authentication and encryption key for all
	string string}	RADIUS communications between the router and the
		RADIUS daemon.
		For an explanation of the arguments, see Step 4 in the
		configuration task table in the “Configuring H.323
		Users via RADIUS” section on page 314.

In addition to the above configuration, make sure that the following information is configured in your CiscoSecure AAA server:

•In the /etc/raddb/clients file, ensure that the following information is provided.

#Client Name	Key
#-----------	-------------------
gk215.cisco.com	testing123

Where:

gk215.cisco.com is resolved to the IP address of the gatekeeper requesting authentication.

•In the /etc/raddb/users file, ensure that the following information is provided:

taeduk@cisco.com Password = "thiswouldbethepassword" User-Service-Type = Framed-User,

Login-Service = Telnet

Where:

taeduk@cisco.com is the h323-id of the gateway authenticating to gatekeeper gk215.cisco.com.

Cisco IOS Voice, Video, and Fax Configuration Guide

VC-319