Cisco Systems VC-289 manual PX2 Configuration, R2 Configuration, VC-356

Configuring H.323 Gatekeepers and Proxies

H.323 Gatekeeper Configuration Examples

Configuring an Inside-Edge Proxy with ASR Without Subnetting Example

The configuration of the co-edge proxy in Edge net 1 has already been presented above. Figure 65 illustrates the configuration of the inside-edge proxy PX2 and edge router R2 of Edge net 2. RIP is used on the edge networks. IGRP is used on the data backbone and the multimedia backbone.

Figure 65 Edge Net 2 with Inside-Edge Proxy and No Subnetting

		E1: 172.22.0.1
	L0: 10.0.0.0
		PX1	Multimedia
	E0: 172.20.0.1		backbone
EP1	Edge net 1
	E0: 172.20.0.2

R1	Data backbone
E1: 172.21.0.1

E1: 172.22.0.2

S0: 10.0.0.1

S0: 10.0.0.2

E0: 172.23.0.2

PX2	Edge net 2	EP2
R2
E2: 172.21.0.2
	E0: 172.23.0.1
		11392

PX2 Configuration

The following output is for the PX2 configuration:

!

proxy h323

!

interface Ethernet0

ip address 172.23.0.2 255.255.0.0

!

interface Serial0

ip address 10.0.0.2 255.0.0.0 ip access-group 101 in

ip access-group 101 out h323 interface

h323 asr

h323 h323-id PX2@zone2.com

h323 gatekeeper ipaddr 10.0.0.2

!

router rip

redistribute connected metric 10000 10 255 255 65535 network 172.23.0.0

!

access-list 101 permit ip any host 10.0.0.2 access-list 101 permit ip host 10.0.0.2 any

R2 Configuration

The following output is for the R2 configuration:

!

interface Ethernet0

ip address 172.23.0.1 255.255.0.0

!

interface Ethernet1

ip address 172.22.0.1 255.255.0.0

Cisco IOS Voice, Video, and Fax Configuration Guide

VC-356