Cisco Systems VC-289 manual Command, Purpose, server radius or aaa group server tacacs+, VC-315

Configuring H.323 Gatekeepers and Proxies

H.323 Gatekeeper Configuration Task List

	Command		Purpose
			– krb5-telnet—Uses the Kerberos 5 Telnet
			authentication protocol when using Telnet to
			connect to the router.
			– line—Uses the line password for
			authentication.
			– local—Uses the local username database for
			authentication
			– local-case—Uses case-sensitive local
			username authentication.
			– none—Uses no authentication.
			– group radius—Uses the list of all RADIUS
			servers for authentication.
			– group tacacs+—Uses the list of all
			TACACS+ servers for authentication.
			– group group-name—Uses a subset of
			RADIUS or TACACS+ servers for
			authentication as defined by the group
			server radius or aaa group server tacacs+
			command.
Step 3 Router(config)# radius-server host {hostname			Specifies the RADIUS server host.
	ip-address}[auth-portport-number][acct-port		The keywords and arguments are as follows:
	port-number] [timeout seconds] [retransmit retries]
	[key string]		• hostname—Specifies the Domain Name System
			(DNS) name of the RADIUS server host.
			• ip-address—Specifies the IP address of the
			RADIUS server host.
			• auth-port—(Optional) Specifies the User
			Datagram Protocol (UDP) destination port for
			authentication requests.
			• port-number—(Optional) Specifies the port
			number for authentication requests; the host is
			not used for authentication if set to 0. If
			unspecified, the port number defaults to 1645.
			• acct-port—(Optional) Specifies the UDP
			destination port for accounting requests.
			• port-number—(Optional) Specifies the port
			number for accounting requests; the host is not
			used for accounting if set to 0. If unspecified, the
			port number defaults to 1646.
			• acct-port—(Optional) Specifies the UDP
			destination port for accounting requests.
			• port-number—(Optional) Specifies the port
			number for accounting requests; the host is not
			used for accounting if set to 0. If unspecified, the
			port number defaults to 1646.
		Cisco IOS Voice, Video, and Fax Configuration Guide

VC-315