Cisco Systems VC-289 manual Command, Purpose, VC-328

Configuring H.323 Gatekeepers and Proxies

H.323 Gatekeeper Configuration Task List

	Command	Purpose
Step 4
	Router(config)# destination-info {e164 email-id	Configures a trigger that is based on a particular
	h323-id}value	destination. Repeat this command for more destinations.
		The keywords and arguments are as follows:
		• e164—Indicates that the destination address is an
			E.164 address.
		• email-id—Indicates that the destination address is an
			e-mail ID.
		• h323-id—Indicates that the destination address is an
			H.323 ID.
		• value—Specifies the value against which to compare
			the destination address in the RAS messages. For
			E.164 addresses, the following wildcards can be
			used:
			– A trailing series of periods, each of which
			represents a single character.
			– A trailing asterisk, which represents one or more
			characters.
Step 5
	Router(config)# redirect-reasonvalue	Configures a trigger that is based on a specific redirect
		reason. Repeat this command for more destinations. The
		value argument specifies the value against which to
		compare the redirect reason in the RAS messages.
		Possible values are from 0 to 65,535. Currently used
		redirect reasons are as follows:
		•	0—Unknown reason.
		• 1—Call forwarding is busy or called DTE is busy.
		• 2—Call forwarded; no reply.
		•	4—Call deflection.
		• 9—Called DTE out of order.
		• 10—Call forwarding by the call DTE 15—Call
			forwarding unconditionally.
		•	15—Call forwarding unconditionally.

Cisco IOS Voice, Video, and Fax Configuration Guide

VC-328