Cisco Systems VC-289 manual Configuring E.164 Interzone Routing, Command, Purpose, VC-321

Configuring H.323 Gatekeepers and Proxies

H.323 Gatekeeper Configuration Task List

	Command	Purpose
Step 2
	Router(config)# gatekeeper	Enters gatekeeper configuration mode.
Step 3
	Router(config-gk)# aaa accounting	Enables authentication, authorization, and
		accounting (AAA) of requested services for billing or
		security purposes when you use RADIUS or
		TACACS+.

For more information about AAA connection accounting services, refer to the Cisco IOS Security Configuration Guide.

Configuring E.164 Interzone Routing

With Cisco IOS Release 12.0(3)T and later releases, interzone routing may be configured using E.164 addresses. To configure interzone routing in the E.164 address space, use the following commands beginning in global configuration mode:

	Command	Purpose
Step 1
	Router(config)# gatekeeper	Enters gatekeeper configuration mode.
Step 2
	Router(config-gk)# zone local gatekeeper-name	Specifies a zone controlled by a gatekeeper.
	domain-name [ras-IP-address]	For an explanation of the arguments, see Step 2 of the
		configuration task table in the “Starting a
		Gatekeeper” section on page 304.
Step 3
	Router(config-gk)#zone remote other-gatekeeper-name	Statically specifies a remote zone if Domain Name
	other-domain-name other-gatekeeper-ip-address	System (DNS) is unavailable or undesirable. Enter
	[port-number]	this command for each gatekeeper.
		The arguments are as follows:
		• other-gatekeeper-name—Specifies the name of
		the remote gatekeeper.
		• other-domain-name—Specifies the domain name
		of the remote gatekeeper.
		• other-gatekeeper-ip-address—Specifies the IP
		address of the remote gatekeeper.
		• port-number—(Optional) Specifies the
		Registration, Admission, and Status (RAS)
		signaling port number for the remote zone. Value
		ranges are from 1 to 65,535. If this option is not
		set, the default is the well-known RAS port
		number 1719.

Cisco IOS Voice, Video, and Fax Configuration Guide

VC-321