Intellinet Network Solutions 530361 user manual Wmm

Page 21

authenticates the client so quickly that there is no perceptible delay in voice or other time-sensitive applications.

Enable Radio Measurement: When this parameter is enabled, the Cisco AP can run the radio monitoring through the associated CCX-compliant clients to continuously monitor the WLAN radio environment and discover any new APs that are transmitting beacons.

Non-Serving Channel Measurements: The Cisco access point can perform monitoring measurements through the CCX-compliant clients on the non-serving channels when this parameter is enabled.

Limit [xxx] milliseconds (0-2000): This setting limits the channel measurement time. The default value is 250 milliseconds.

Turn off RF: Click to turn off the radio of the adapter; click again to turn it back on.

WMM

This screen enables you to configure WMM (Wi-Fi Multimedia) and other QoS settings, such as Power Save and Direct Link Setup.

WMM Enable: Click the check box (then click “Apply”) to enable the WMM function, which then lets you configure the WMM Power Save and Direct Link Setup functions.

•WMM – Power Save Enable: Click the check box to enable, then click “Setting” to further configure the function as “AC_BK,” “AC_BE,” “AC_VI” or “AC_VO.”

CONFIGURATION 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Model Page FCC Certifications Reorient or relocate the receiving antennaFCC RF Radiation Exposure Statement TTE Compliance StatementEU Countries Intended for Use Table of contents XP procedure is similar for Windows 98SE/Me/2000/2003/Vista InstallationConfiguration When the Finish screen appears, click FinishVista, a Found New Option RaConfig as Configuration utilityNetwork Profile Configuration Profile Configuration Change is recommended Profile Authentication and Encryption SecurityConfiguration Configuration 802.1x Setting/Certification User login to the LAN approved or deniedRadius Client Radius Server Windows802.1x Setting/CA Server Wireless Mode Select from the drop-down menu Server Name Enter the authentication server nameStatistics AdvancedTo this mode. This mode is also the default setting Show Authentication Status Dialog Select to display WMM About Wps configurationAutomatically select the AP Select to activate Switch to AP Mode to activate the SoftAP function ConfigurationSoftAP Ssid The Ssid upWireless Mode Selects the wireless mode supported by the AP Open No authentication is needed within the wireless network Security settingSoftap Access control Event log Mac tableStatistics General Specifications
Top Page Image Contents