Intellinet Network Solutions 530361 user manual Softap

Page 27

have the matching password from joining the network, while encrypting the data traveling between authorized devices.

WPA2-PSK:This is also for home and small business use.

WPA-PSK/WPA2-PSK:When selecting this mode, the AP supports both WPA-PSK and WPA2-PSK.

Encryption Type: Five options are available in the drop-down menu.

Not Use: Disables the encryption mode.

WEP: Enables WEP Data Encryption. When the item is selected, continue setting the WEP Key.

TKIP: The Temporal Key Integrity Protocol changes the temporal key every 10,000 packets (a kind of message transmitted over a network.) This ensures much greater security than standard WEP security.

AES: Advanced Encryption Standard was developed to provide the highest degree of security and authenticity for digital information.

It’s the most advanced solution defined by IEEE 802.11i for security in a wireless network.

BOTH: In this mode, the AP supports both TKIP and AES.

WPA Pre-Shared Key: The WPA-PSK key can be 8 to 64 characters in length and can be letters or numbers. This same key must be used on all the wireless stations in the network.

Group Rekey Interval: This function is available when using WPA-PSK and WPA2-PSK encryption algorithms.

WEP Key (Key#1–4):WEP keys are used to encrypt data transmitted in the wireless network. There are two types of key length: 64-bit and 128-bit. Assign a default encryption key (Key#1 to Key#4) by clicking on the corresponding radio button. To fill in each text field:

64-bit:Input 10-digit hex values (in the A-F, a-f and 0-9 range) or 5-digit ASCII characters (a-z and 0-9) as the encryption keys. For example: “0123456aef” or “test1.”

128-bit:Input 26-digit hex values (in the A-F, a-f and 0-9 range) or 13-digit ASCII characters (“a-z” and “0-9”) as the encryption keys. For example: “01234567890123456789abcdef“ or “administrator.”

Show Password: The password will be displayed in clear text instead of with asterisks.

softap 27

Image 27
Contents Model Page FCC Certifications Reorient or relocate the receiving antennaFCC RF Radiation Exposure Statement TTE Compliance StatementEU Countries Intended for Use Table of contents XP procedure is similar for Windows 98SE/Me/2000/2003/Vista InstallationConfiguration When the Finish screen appears, click FinishVista, a Found New Option RaConfig as Configuration utilityNetwork Profile Configuration Profile Configuration Change is recommended Profile Authentication and Encryption SecurityConfiguration Configuration Windows User login to the LAN approved or denied802.1x Setting/Certification Radius Client Radius Server802.1x Setting/CA Server Advanced Server Name Enter the authentication server nameWireless Mode Select from the drop-down menu StatisticsTo this mode. This mode is also the default setting Show Authentication Status Dialog Select to display WMM About Wps configurationAutomatically select the AP Select to activate Ssid The Ssid up ConfigurationSwitch to AP Mode to activate the SoftAP function SoftAPWireless Mode Selects the wireless mode supported by the AP Open No authentication is needed within the wireless network Security settingSoftap Access control Event log Mac tableStatistics General Specifications