5.2.7.6 ACL Configuration
The Access Control List (ACL) is a list of permissions attached to the router that specifies who is allowed to access this router. If ACL is enabled, all hosts cannot access this router except for the hosts with an IP address in the ACL table.
Parameter | Description |
ACL Capability | Enable or disable the ACL function. |
Enable | Check to enable this ACL entry. |
Interface | Select the interface domain: LAN or WAN. |
IP Address | Enter the IP address that is allowed to access the router. |
Subnet Mask | Enter the subnet mask that is allowed to access the router. |
ACL Table | The ACL settings will be listed here. Click “Delete Selected” to |
| delete the settings you have selected. To remove all settings |
| from the table, click “Delete All.” |
When you finish, click “Apply Changes.” You’ll see the following message displayed on Web browser.
74