Intellinet Network Solutions 524780 user manual Initialization of the Adsl connection failed

Initialization of the ADSL connection failed.

STEPS	CORRECTIVE ACTION
1	Check the cable connections between the ADSL port and the
	wall jack. The ADSL LED on the rear panel of the router should
	be on.
2	Check that the VPI, VCI, Type of Encapsulation and Type of
	Multiplexing settings are the same as what you collected from
	your ISP.
3	Restart the router. If you still have problems, you may need to
	verify your VPI, VCI, Type of Encapsulation and Type of
	Multiplexing settings with the ISP.

I cannot get a WAN IP address from the ISP.

STEPS	CORRECTIVE ACTION
1	The ISP provides the WAN IP address after authenticating you.
	Authentication may be through the user name and password, the
	MAC address or the host name.
2	The username and password apply to PPPoE and PPoA
	encapsulation only. Make sure that you have entered the correct
	Service Type, User Name and Password (be sure to use the
	correct case).

Internet connection disconnects.

STEPS	CORRECTIVE ACTION
1	Check the connection type.
2	If you use PPPoA or PPPoE encapsulation, check the idle time-
	out setting.
3	Contact your ISP.

86