Hawking Technology H-BR49 manual For Catv dynamic mode

For CATV dynamic mode:

	Some Internet Service Providers (ISP) require that you
	register the MAC address of your network card/adapter,
	which was connected to your cable or DSL modem during
	installation. If your ISPs require MAC address
	registration, find your adapter’s MAC address by doing
	the following:
Adapter Address	Using Windows 95 or 98: Click Start Run; type in
	“winipcfg”; select the network adapter (not PPP adapter).
	Using Windows ME, 2000 or XP: Click Start Run; type
	in “command”; press Enter. At the DOS prompt, type
	“ipconfig/all”. Look for the Adapter’s “Physical
	Address”: a 12-digit HEX number (00-11-22-aa-bb-cc).
	Enter a descriptive name for identification purposes. You
Device/Computer	may have to check with your ISP to see if your Broadband
	Internet service has been configured with a host and
Name (or Host
	domain name. In most cases, these fields may be left
Name by some
	blank. Some Internet Service Providers (ISP) require this
ISP.)
	information and if that is the case, they will provide you
	with the name.
Domain Name	Ex. yourcompany.com,
	Provided by your ISP.