Hawking Technology H-BR49 manual Upgrade

Page 51

Domain Name	For example: yourcompany.com. The maximum input for
Domain Name	this field is 32 alphanumeric characters and it is case
	insensitive.
IP Config.
Dynamic	This line is grayed out for static configuration.
Static
IP Address	Enter the information provided by your ISP.
Subnet Mask	Enter the information provided by your ISP.
Gateway	Enter the information provided by your ISP.
DNS Server
Dynamic	This line is grayed out for static configuration.
Static
Primary/Secondary	Enter the information provided by your ISP.

Upgrade

1.Ask your local distributor to get the latest firmware's updated version.

2.Download and store the updated program into the server's hard disk.

3.Click Default File→ Start to start upgrading. If you copy the firmware file to a desired location, in the Upgrade Firmware window, select “Specify File”, then enter the firmware file’s path (e.g., C:\WINDOWS\Desktop\firmware.bin), and then click “Start” to upgrade the firmware.

Figure 37

Image 51

Contents BR49 Trademarks & Copyright FCC CertificationsCE Mark Warning Hawking Limited Warranty Page Page Sample Application Features Part Names and Functions Local Factory ResetPort/button Functions InternetPassword Default setting No password Local and Global Port AddressesInformation from ISP For Catv dynamic mode Page Page PPPoE DSL dynamic mode Catv dynamic ModeObtain configuration automatically Catv dynamic modeIP Config Device InformationName PPPoE DSL dynamic Mode PPPoE Account PasswordDevice/Computer Name Active Profile 1 2 3 You canService Name Device Configuration Primary/Secondary GatewayDhcp Server Private NetworkWins server Start IP addressNumber of IP addresses Static Dhcp IP & MAC addressBlock WAN Request ManagementChange Administrator’s password Limit ManagementBlock WAN Management Coordinate Result Request Via Internet Virtual Server Modify the Configuration PortAdd Server Packet Filters Direction Network Adapter Address FilterIP Address Filter IP RangeFilter List Static RouterExample Application Select Static Route #1 or Static Route #2Page Email Account Check E-MailDynamic DNS Undo Save WAN IP StatusSessions List IP Client/ Port ClientPort Fake Users List IP Remote/Port RemoteIdle Save Configuration Others Factory ResetLoad Configuration from File Firmware Upgrade Check the box for Change Administrator’s Password Getting Started WAN IP Icon Function DescriptionClick on the tool bar to configure the selected device LAN Port Modify the configuration portClick to save the setting Click to cancel the settingWAN Port Do not distribute IP address to local computers1Distribute IP addresses to local computers Number of IP addresses in poolCatv Dynamic Mode Name Domain Name DNS ServerDynamic StaticPPPoE Account Active Profile If idle for ServiceAuto DisconnectStatic Mode Upgrade WAN IP User List Session List What is Dynamic DNS DDNS? Why Dynamic DNS? What is DMZ?What is a Wild card ? What is MX Mail Exchanger? And why MX?What is PPPoE Point-to-Point Protocol Over Ethernet ? How do I know if I am using PPPoE? IP address conflictCheck the physical connectivity of the local network Check the status of your H-BR49 Check the physical connectivity of the broadband deviceRun TCP/IP Network DiagnosisIP Configuration IP Configuration Type ping 168.95.192.1 and click OK IpconfigGetting Technical Support Reply from 192.168.0.1 bytes=32 time=3ms TTL=100Internet Connectivity Checkup \ P ING 168.95.192.1 -wAppendix a Specifications Appendix B Supported Internet Applications Appendix C WAN Port Link Status PPPoE link status Dhcp under claiming Dhcp link statusStatic IP assignment link status Static assigned Dhcp already claimed