Hawking Technology H-BR49 manual Device Information, Name, IP Config

Page 15

Check to modify the MAC address when necessary.

 

Figure 5

Device Information

 

 

 

 

 

 

 

This field is grayed out because the Adapter Address is not

 

 

supposed to be entered randomly. Do Not alter the content

Adapter Address

 

unless you are sure it is necessary to modify your MAC

 

 

address. To modify the address, check Modify and enter

 

 

the desired MAC address.

Device/Computer

 

Enter a descriptive name for identification purposes. Some

 

Internet Service Providers (ISP) require this information

Name

 

 

and if that is the case, they will provide you with the name.

 

 

 

 

For example: yourcompany.com. The maximum input

 

 

for this field is 32 alphanumeric characters and it is case

Domain Name

 

insensitive. Note: 1. Your ISP may ask you to input a

 

certain domain name. 2. A Domain name is also

 

 

 

 

required for the internal network’s email and news

 

 

functions.

IP Config

 

This field is grayed out because the IP address is

 

obtained dynamically.

 

 

Image 15
Contents BR49 Trademarks & Copyright FCC CertificationsCE Mark Warning Hawking Limited Warranty Page Page Sample Application Features Part Names and Functions Local Factory ResetPort/button Functions InternetPassword Default setting No password Local and Global Port AddressesInformation from ISP For Catv dynamic mode Page Page PPPoE DSL dynamic mode Catv dynamic ModeObtain configuration automatically Catv dynamic modeIP Config Device InformationName PPPoE DSL dynamic Mode PPPoE Account PasswordDevice/Computer Name Active Profile 1 2 3 You canService Name Device Configuration Primary/Secondary GatewayDhcp Server Private NetworkWins server Start IP addressNumber of IP addresses Static Dhcp IP & MAC addressBlock WAN Request ManagementChange Administrator’s password Limit ManagementBlock WAN Management Coordinate Result Request Via Internet Virtual Server Modify the Configuration PortAdd Server Packet Filters Direction Network Adapter Address FilterIP Address Filter IP RangeFilter List Static RouterExample Application Select Static Route #1 or Static Route #2Page Email Account Check E-MailDynamic DNS Undo Save WAN IP StatusSessions List IP Client/ Port ClientPort Fake Users List IP Remote/Port RemoteIdle Save Configuration Others Factory ResetLoad Configuration from File Firmware Upgrade Check the box for Change Administrator’s Password Getting Started WAN IP Icon Function DescriptionClick on the tool bar to configure the selected device LAN Port Modify the configuration portClick to save the setting Click to cancel the settingWAN Port Do not distribute IP address to local computers1Distribute IP addresses to local computers Number of IP addresses in poolCatv Dynamic Mode Name Domain Name DNS ServerDynamic StaticPPPoE Account Active Profile If idle for ServiceAuto DisconnectStatic Mode Upgrade WAN IP User List Session List What is Dynamic DNS DDNS? Why Dynamic DNS? What is DMZ?What is a Wild card ? What is MX Mail Exchanger? And why MX?What is PPPoE Point-to-Point Protocol Over Ethernet ? How do I know if I am using PPPoE? IP address conflictCheck the physical connectivity of the local network Check the status of your H-BR49 Check the physical connectivity of the broadband deviceRun TCP/IP Network DiagnosisIP Configuration IP Configuration Type ping 168.95.192.1 and click OK IpconfigGetting Technical Support Reply from 192.168.0.1 bytes=32 time=3ms TTL=100Internet Connectivity Checkup \ P ING 168.95.192.1 -wAppendix a Specifications Appendix B Supported Internet Applications Appendix C WAN Port Link Status PPPoE link status Dhcp under claiming Dhcp link statusStatic IP assignment link status Static assigned Dhcp already claimed