Hawking Technology H-BR49 manual

Page 13

Before you start setting up IP Sharing via browser-based web configuration, make sure that:

•Assuming the workstation’s TCP/IP is set to obtain IP automatically and the IP Sharing Device’s Local Port is set to “Distribute IP” (default), and all the cables are connected correctly, you are now ready to configure this device via Web Browser. Open the browser, enter the local port IP address (default at 192.168.1.254) of the IP Sharing Device, and click “Go” to get the login page.

Figure 3

No user name is required. The default password is left blank. If you have set a password, enter that and click OK to continue.

Figure 4

At the setup home page, the left navigation pane for bookmarks links you directly to the desired setup page. You can select Global Port, Local Port,

Management, Virtual Server, Packet Filter, Static Router, Checking E-Mail, Dynamic DNS, Network Status (WAN IP Status, Session List, User

Image 13

Contents BR49 FCC Certifications Trademarks & CopyrightCE Mark Warning Hawking Limited Warranty Page Page Sample Application Features Part Names and Functions Port/button Functions Factory ResetInternet LocalLocal and Global Port Addresses Password Default setting No passwordInformation from ISP For Catv dynamic mode Page Page Obtain configuration automatically Catv dynamic ModeCatv dynamic mode PPPoE DSL dynamic modeDevice Information IP ConfigName PPPoE DSL dynamic Mode Device/Computer Name PasswordActive Profile 1 2 3 You can PPPoE AccountService Name Device Configuration Primary/Secondary GatewayDhcp Server Private NetworkNumber of IP addresses Start IP addressStatic Dhcp IP & MAC address Wins serverBlock WAN Request ManagementLimit Management Change Administrator’s passwordBlock WAN Management Coordinate Result Request Via Internet Virtual Server Modify the Configuration PortAdd Server Packet Filters IP Address Filter Network Adapter Address FilterIP Range DirectionFilter List Static RouterExample Application Select Static Route #1 or Static Route #2Page Email Account Check E-MailDynamic DNS Undo Save WAN IP StatusIP Client/ Port Client Sessions ListPort Fake IP Remote/Port Remote Users ListIdle Save Configuration Others Factory ResetLoad Configuration from File Firmware Upgrade Check the box for Change Administrator’s Password Getting Started WAN IP Icon Function DescriptionClick on the tool bar to configure the selected device Click to save the setting Modify the configuration portClick to cancel the setting LAN PortDistribute IP addresses to local computers Do not distribute IP address to local computers1Number of IP addresses in pool WAN PortCatv Dynamic Mode Dynamic DNS ServerStatic Name Domain NamePPPoE Account Active Profile Auto ServiceDisconnect If idle forStatic Mode Upgrade WAN IP User List Session List What is Dynamic DNS DDNS? Why Dynamic DNS? What is DMZ?What is MX Mail Exchanger? And why MX? What is a Wild card ?What is PPPoE Point-to-Point Protocol Over Ethernet ? IP address conflict How do I know if I am using PPPoE?Check the physical connectivity of the local network Check the status of your H-BR49 Check the physical connectivity of the broadband deviceRun TCP/IP Network DiagnosisIP Configuration IP Configuration Type ping 168.95.192.1 and click OK IpconfigInternet Connectivity Checkup Reply from 192.168.0.1 bytes=32 time=3ms TTL=100\ P ING 168.95.192.1 -w Getting Technical SupportAppendix a Specifications Appendix B Supported Internet Applications Appendix C WAN Port Link Status PPPoE link status Static IP assignment link status Static assigned Dhcp link statusDhcp already claimed Dhcp under claiming