Hawking Technology H-BR49 Auto, Disconnect, If idle for, Minutes, Service, Static IP, Reconnect

and then click SAVE. The device will save the information, restart and return to the previous menu page. If you don’t see the saved information on the screen from the menu on the left, click on the “Global Port” to refresh the screen.

Username	The maximum input is 52 alphanumeric characters (case sensitive).
Password	The maximum input is 36 alphanumeric characters (case sensitive).
	Configure this device to disconnect the PPPoE connection when
Auto-	there is no activity for a predetermined period of time.
disconnect	• Default: 5 minutes. You can input any number from 0 to
if idle for x	65535
minutes	• To ensure that the line is always connected, set the number
	to 0.
	For identification purposes. If required, your ISP will provide you
	with the information.
Service	Max packet size (TCP MSS): Click the down arrow to select the
	most appropriate MSS (maximum segment size; default value is
Name	1452) for your application. Reducing the packet size can enhance
	connection to certain web sites or speed up packet transfer rate.
	NOTE: If the incorrect selection is chosen, you may not be able to
	open certain web sites.
Static IP	Enter the IP address provided by your ISP.
Address
Auto-	Check to enable auto-reconnect with the PPPoE line. This function
	allows the device to automatically reconnect when the line is
reconnect
	disconnected due to an ISP problem.
Static DNS	Enter the primary and secondary DNS addresses provided by your
Server	ISP.