Hawking Technology H-BR49 manual

Page 12

For DSL dynamic mode:

PPPoE Account

 

Provided by your ISP

Info

 

 

 

Username

 

Provided by your ISP.

Password

 

Provided by your ISP.

Service Name

 

For identification purposes. If it is required, your

 

 

ISP will provide you with the information.

Static IP

 

Provided by your ISP.

Address

 

 

 

Static DNS

 

Provided by your ISP.

Server

 

 

 

For Static Mode:

 

 

 

 

 

 

 

 

 

IP address

 

 

 

ISP-assigned IP address

 

Example: 203.66.81.201

Subnet mask

 

Example: 255.255.255.0

Gateway

 

Example: 203.66.81.254

DNS server #1

 

Example: 203.66.81.251

DNS server #2

 

Example: 203.66.81.252

Page 11 Page 13
Image 12
Page 11 Page 13
Contents BR49 Trademarks & Copyright FCC CertificationsCE Mark Warning Hawking Limited Warranty Page Page Sample Application Features Part Names and Functions Factory Reset Port/button FunctionsInternet LocalPassword Default setting No password Local and Global Port AddressesInformation from ISP For Catv dynamic mode Page Page Catv dynamic Mode Obtain configuration automaticallyCatv dynamic mode PPPoE DSL dynamic modeIP Config Device InformationName PPPoE DSL dynamic Mode Password Device/Computer NameActive Profile 1 2 3 You can PPPoE AccountService Name Device Configuration Gateway Primary/SecondaryPrivate Network Dhcp ServerStart IP address Number of IP addressesStatic Dhcp IP & MAC address Wins serverManagement Block WAN RequestChange Administrator’s password Limit ManagementBlock WAN Management Coordinate Result Request Via Internet Modify the Configuration Port Virtual ServerAdd Server Packet Filters Network Adapter Address Filter IP Address FilterIP Range DirectionStatic Router Filter ListSelect Static Route #1 or Static Route #2 Example ApplicationPage Check E-Mail Email AccountDynamic DNS WAN IP Status Undo SaveSessions List IP Client/ Port ClientPort Fake Users List IP Remote/Port RemoteIdle Others Factory Reset Save ConfigurationLoad Configuration from File Firmware Upgrade Check the box for Change Administrator’s Password Getting Started Icon Function Description WAN IPClick on the tool bar to configure the selected device Modify the configuration port Click to save the settingClick to cancel the setting LAN PortDo not distribute IP address to local computers1 Distribute IP addresses to local computersNumber of IP addresses in pool WAN PortCatv Dynamic Mode DNS Server DynamicStatic Name Domain NamePPPoE Account Active Profile Service AutoDisconnect If idle forStatic Mode Upgrade WAN IP User List Session List What is DMZ? What is Dynamic DNS DDNS? Why Dynamic DNS?What is a Wild card ? What is MX Mail Exchanger? And why MX?What is PPPoE Point-to-Point Protocol Over Ethernet ? How do I know if I am using PPPoE? IP address conflictCheck the physical connectivity of the local network Check the physical connectivity of the broadband device Check the status of your H-BR49TCP/IP Network Diagnosis RunIP Configuration IP Configuration Ipconfig Type ping 168.95.192.1 and click OKReply from 192.168.0.1 bytes=32 time=3ms TTL=100 Internet Connectivity Checkup\ P ING 168.95.192.1 -w Getting Technical SupportAppendix a Specifications Appendix B Supported Internet Applications Appendix C WAN Port Link Status PPPoE link status Dhcp link status Static IP assignment link status Static assignedDhcp already claimed Dhcp under claiming
Top Page Image Contents