Hawking Technology H-BR49 manual Do not distribute IP address to local computers1, WAN Port

Page 45

IP Address

•Default: 192.168.1.254

SubNet mask

•Default: 255.255.255.0

Do not distribute IP address to local computers1

Checking this radio button to disable this Broadband Router from distributing IP addresses to the local network.

Distribute IP addresses to local computers

Click this radio button to enable this Broadband Router to distribute IP addresses. The following field will be activated for you to enter the starting IP address:

Start IP Address: Enter the starting address for this local IP network address pool. The pool is a piece of continuous IP.

Number of IP addresses in pool

•Maximum: 253. Default: 253

Click to SAVE the settings.

WAN Port

This screen contains settings for the WAN interface. Different WAN interfaces will have different displays, including ones for:

•ADSL/Cable modem (Obtain Configuration Automatically [CATV Dynamic Mode] )

•ADSL with PPPoE enabled (PPPoE [DSL Dynamic Mode])

•Static Leased Line (Static Configuration)

Click to select the appropriate WAN interface for your environment.

1If you check this selection, remember you have to specify a static IP address for each of your local computers.

Image 45

Contents BR49 Trademarks & Copyright FCC CertificationsCE Mark Warning Hawking Limited Warranty Page Page Sample Application Features Part Names and Functions Port/button Functions Factory ResetInternet LocalPassword Default setting No password Local and Global Port AddressesInformation from ISP For Catv dynamic mode Page Page Obtain configuration automatically Catv dynamic ModeCatv dynamic mode PPPoE DSL dynamic modeIP Config Device InformationName PPPoE DSL dynamic Mode Device/Computer Name PasswordActive Profile 1 2 3 You can PPPoE AccountService Name Device Configuration Primary/Secondary GatewayDhcp Server Private NetworkNumber of IP addresses Start IP addressStatic Dhcp IP & MAC address Wins serverBlock WAN Request ManagementChange Administrator’s password Limit ManagementBlock WAN Management Coordinate Result Request Via Internet Virtual Server Modify the Configuration PortAdd Server Packet Filters IP Address Filter Network Adapter Address FilterIP Range DirectionFilter List Static RouterExample Application Select Static Route #1 or Static Route #2Page Email Account Check E-MailDynamic DNS Undo Save WAN IP StatusSessions List IP Client/ Port ClientPort Fake Users List IP Remote/Port RemoteIdle Save Configuration Others Factory ResetLoad Configuration from File Firmware Upgrade Check the box for Change Administrator’s Password Getting Started WAN IP Icon Function DescriptionClick on the tool bar to configure the selected device Click to save the setting Modify the configuration portClick to cancel the setting LAN PortDistribute IP addresses to local computers Do not distribute IP address to local computers1Number of IP addresses in pool WAN PortCatv Dynamic Mode Dynamic DNS ServerStatic Name Domain NamePPPoE Account Active Profile Auto ServiceDisconnect If idle forStatic Mode Upgrade WAN IP User List Session List What is Dynamic DNS DDNS? Why Dynamic DNS? What is DMZ?What is a Wild card ? What is MX Mail Exchanger? And why MX?What is PPPoE Point-to-Point Protocol Over Ethernet ? How do I know if I am using PPPoE? IP address conflictCheck the physical connectivity of the local network Check the status of your H-BR49 Check the physical connectivity of the broadband deviceRun TCP/IP Network DiagnosisIP Configuration IP Configuration Type ping 168.95.192.1 and click OK IpconfigInternet Connectivity Checkup Reply from 192.168.0.1 bytes=32 time=3ms TTL=100\ P ING 168.95.192.1 -w Getting Technical SupportAppendix a Specifications Appendix B Supported Internet Applications Appendix C WAN Port Link Status PPPoE link status Static IP assignment link status Static assigned Dhcp link statusDhcp already claimed Dhcp under claiming