HP StoreServ Application Suite for Microsoft Hyper-V E-Media manual Update-StoreServparameters

Table 57 Update-StoreServparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address
-HypervName	Required	Microsoft Hyper-V host or cluster name.
		This is FQDN or IP address. Synonyms
		are supported. The localhost is not
		supported.
-StoreServName	Required	This is FQDN or IP address, etc.
		Synonyms for HP 3PAR StoreServ are
		supported.
-StoreServUsername	Required	NOTE: If not provided, a dialog box
		will pop up asking for credentials.
-StoreServPassword	Required	NOTE: If not provided, a dialog box
		will pop up asking for credentials.
-Verbose	Optional	Display progress messages.

Success Paths

•Scenario 1: Update HP 3PAR StoreServ is successful. Add HP 3PAR StoreServ is successful.

Failure Paths

•Scenario 1: Session owner is invalid.

Every session command received on RMH Server is validated to originate from the same IP address that initiated the session. If IP does not match, the command fails.

•Scenario 2: HP 3PAR StoreServ session credentials are invalid. HP 3PAR StoreServ session credentials provided are invalid.

•Scenario 3: HP 3PAR StoreServ credentials are already specified. User has already logged on with specified HP 3PAR StoreServ.

88 HP 3PAR Recovery Manager for Microsoft Hyper-V Powershell Commands