HP StoreServ Application Suite for Microsoft Hyper-V Media Restore-vCopyVm, Force, RestartVm

Table 30 Mount-vCopyparameters (continued)

Parameter	Optional/Required	Description
-HypervPassword	Optional	Hyper-V user name. If not specified,
		HypervUsername is used from
		Login-Rmh.
-Verbose	Optional	Displays progress messages.

The command returns RmhMountVirtualCopySetResult objects and contains:

•RmhMountVirtualCopySet with current state updated

•Information on name, WWN, partition, volume guid path, and mount point of each Virtual Volume mounted

Restore-vCopyVm

The restore-vCopyVminitiates a full restore or recovery of Virtual Machines.

Preconditions

The user must first login with Login-Rmh.

Syntax

Any optional parameters require square brackets [ ] around them.

Restore-vCopyVm -RmhServerName <RmhServerName> [-HypervName] -VcNameUuid <VcNameUuid> -VmNameUuid <VmNameUuid> [-Timestamp] [-Force] [-RestartVm] [-Verbose]

Table 31 Restore-vCopyVmparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-HypervName	Optional	Optionally select Hyper-V host/cluster
		to use. If not specified, Hyper-V
		host/cluster must be selected using
		Select-Hyperv. This is FQDN or IP
		address. Synonyms for Hyper-V are
		supported. The localhost is not
		supported.
-VcNameUuid	Required	Select VC by name/uuid.
-VmNameUuid	Required	Select name/uuid to filter VC selection
		by VM.
-Timestamp	Optional	Specify timestamp of VC to locate in
		the format mmddyyhhmmss.
-Force	Optional	Bypass confirmation prompt.
-RestartVm	Optional	If specified, VM will be restarted.
-Verbose	Optional	Displays progress messages.

This command returns the location of restored Virtual Machine and host name.

Working with Virtual Copies 53