![](/images/new-backgrounds/1213368/213368131x1.webp)
Table 38 Create-vCopy parameters (continued)
Parameter | Optional/Required | Description |
|
| supported. The localhost is not |
|
| supported. |
| Required | Comma separated VM names (or |
|
| UUIDs) . |
|
| For best practice, if more than one VM |
|
| name specified, ensure all VMs use the |
|
| same Storage System volume. |
| Optional | The Virtual Copy name prefix. A unique |
|
| timestamp will be generated for this |
|
| new Virtual Copy and appended to this |
|
| prefix. If not specified, the VC name |
|
| will be |
|
| timestamp is generated for this new |
|
| Virtual Copy. |
| Optional | Integer value followed by letter h or d |
|
| for Hours and Days respectively Default: |
|
| use the RMH Policy. |
| Optional | Integer value followed by letter h or d |
|
| for Hours and Days respectively Default: |
|
| use the RMH Policy. |
Optional | Disabled or enabled. | |
|
| Default: use the RMH policy. |
Optional | Displays progress messages. |
Result with Description
•Multiple {RmhCreateVirtualcopyResult} objects.
◦ VM Name or UUID
◦
◦
◦
Success/Failure status of the
Detailed error message(s) when operation fails
An instance of an object of type RMHirtualcopySet describing created Virtual Copy set. (create a link for the following: See
Success Paths
•Scenario 1: Virtual Copies are successfully created. Virtual Copies on VM(s) specified are successfully created.
Failure Paths
•Scenario 1: Session owner is invalid.
Every session command received on RMH Server is validated to originate from the same IP address that initiated the session. If IP does not match, the command fails.
•Scenario 2: Storage System session credentials are not provided. Storage System session credentials are not provided for this command.
•Scenario 3: No VM is specified.
At least one VM must be specified for command.
66 HP 3PAR Recovery Manager for Microsoft