HP Application Software Suite for Microsoft Hyper-V manual Login-Rmhparameters

Result with Description

•Multiple {RMHirtualMachineInfo} objects:

Multiple RMHirtualMachineInfo objects (one per VM).

Success Paths

•Scenario 1: Virtual Machine(s) is fetched. At least one Virtual Machine is returned.

•Scenario 2: Virtual Machine(s) is not fetched.

No Virtual Machines are available. Nothing is returned.

Failure Paths

•Scenario 1: Session owner is invalid.

Every session command received on RMH Server is validated to originate from the same IP address that initiated the session. If IP does not match, the command fails.

•Scenario 2: Unable to fetch Hyper-V. A Hyper-V is required to fetch VMs.

Login-Rmh

Log into RMH Server using Windows RMH account.

The optional login-Rmhenables the user to log on to Recovery Manager for Hyper-V. After a successful login is established, the user is not required to enter additional credentials for subsequent Cmdlets.

Preconditions

The user must first login with Login-Rmh.

Syntax

Any optional parameters require square brackets [ ] around them.

Login-Rmh-RmhServerName <-RmhServerName>-RmhUserName <-RmhUserName>-RmhPassword <-RmhPassword>[-RmhEncrytedPassword]

Table 44 Login-Rmhparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-RmhUserName	Required	RMH user name. If not specified, a
		dialog box will be presented to enter
		credentials.
-RmhPassword	Required	RMH user password. If not specified, a
		dialog box will be presented to enter
		credentials.
-RmhEncrytedPassword	Optional	May be used instead of
		-RmhPassword.

72 HP 3PAR Recovery Manager for Microsoft Hyper-V Powershell Commands