Q-Logic FIRMWARE VERSION 7.4 manual A1005.0039 Fabric Login Flogi from address FCaddress failed

A

3 – Event Messages Alarm Events

(A1005.0039) (Fabric Login (FLOGI) from address FC_address failed)

Meaning:	The payload of the FLOGI was not valid.
Action:	Check the device connection or replace the device. If the problem
	persists, contact your authorized maintenance provider.

(A1005.003A) (Fabric Login (FLOGI) from address FC_address failed authorization/authentication)

Meaning:	Security authentication failed.
Action:	Check the security configuration on both the device and the switch
	to ensure that they are configured properly.

(A1005.003B) (Warning - Debug logging filter level is set)

Meaning:	Debug logging has been set using the Set Log Level command.
Action:	Confirm that you intended to do this. If not, use the Set Log Level
	command to change the severity level to Info, Warn, or Critical.

(A1005.003C) (User Port(s) port_numbers, isolated, lost steering path, administering them to state DOWNED.)

Meaning:	The ports required for steering the user ports have failed.
Action:	Contact your authorized maintenance provider.

(A1005.003E) (Warning, port(s) port_numbers configured ONLINE, but remain DOWN after

NDCLA.)
Meaning:	Ports that were down before a non-disruptive code load and
	activation remain down. This message serves as a reminder
	because the alarm log is cleared during the non-disruptive code
	load and activation.
Action:	None

(A1005.003F) (Badly formatted SML Notification Ack session session_ID string - string)

Meaning:	The switch sent a notification that was not formatted correctly;
	there may be a resource problem on the switch.
Action:	If this is a recurring message, contact your authorized maintenance
	provider.
(A1005.0040) (Unsupported SFP within port.)
Meaning:	An unsupported SFP transceiver was installed in the port.
Action:	Replace the transceiver.

(A1005.0041) (Setting port admin state DOWN due to POST failure)

Meaning:	The port failed the power-on self test and has been disabled.
Action:	Contact your authorized maintenance provider.

59060-05 A 3-23