Q-Logic FIRMWARE VERSION 7.4 manual A1007.0037 Device devicewwn failed port binding

3 – Event Messages Alarm Events

S

(A1007.0036) (Port taken offline due to port binding failure following configuration change.)

Meaning:	A configuration change was made to the port binding list such that
	the device(s) on the port were no longer allowed to be logged in.
Action:	Add the devices to the port binding list.
(A1007.0037) (Device device_wwn failed port binding)
Meaning:	A switch device attempted to login as an Inter-Switch Link (ISL),
	but that device was not configured in the port binding list for the
	specified port.
Action:	Add the device to the port binding list.
(A1007.0038) (Device device_wwn failed switch binding)
Meaning:	A switch device attempted to login as Inter-Switch Link (ISL), but
	that device was not configured in the switch binding list.
Action:	Add the device to the switch binding list.
(A1007.0039) (Ignoring RADIUS Server server, no shared secret configured)
Meaning:	An attempt was made to authenticate a switch login through a
	Remote Authentication Dial In Service (RADIUS) server, but no
	shared secret exists.
Action:	Configure a shared secret.

(A1007.003A) (Using local user authentication. No radius servers configured for user authentication)

Meaning:	A Remote Authentication Dial In Service (RADIUS) configuration
	was set to authenticate user accounts through a RADIUS server,
	but no RADIUS server was configured. User accounts will be
	authenticated by the switch.
Action:	Correct the user authentication order or configure a RADIUS
	server.
(A2000.0001) (Pwr1 removed - ALARM SET)
Meaning:	Power supply #1 has failed or was removed from the switch.
Action:	Contact your authorized maintenance provider.
(A2000.0002) (Pwr2 failure - ALARM SET)
Meaning:	Power supply #2 has failed or was removed from the switch.
Action:	Contact your authorized maintenance provider.

3-40 59060-05 A