Q-Logic FIRMWARE VERSION 7.4 manual Switch New firmware has been installed

Models: FIRMWARE VERSION 7.4

1 84
Download 84 pages 32.06 Kb
Page 67
Image 67

A

3 – Event Messages Critical Events

(C)(8400.0060) (Switch) (Warning-Illegal transparent mode configuration, primary and backup cannot be mapped to the same port. Port port_number 's backup mapping has been deleted.

Meaning:

When mapping TH ports to TF ports, the primary and backup TF

 

ports cannot be the same for a given TH port.]

(C)(8400.0061) (Switch) (Warning-Illegal transparent mode configuration, Either the primary or backup map for port port_number was set to a port whose type is not TF. The mapping for this port has been cleared.

Meaning:

An attempt was made to map a TH port to a port that was not of

 

type TF.

(C) (8400.0062) (Switch) (New firmware has been installed.)

Meaning:

New firmware was successfully installed.

(C)(8400.0065) (Switch) (The switch is being automatically hardreset after leaving the Diagnostics AdminState.)

Meaning:

The switch automatically undergoes a hard reset after leaving the

 

Diagnostics administrative state.

(C)(8400.0066) (Switch) (IOn) (Blade is being automatically hardreset after leaving the Diagnostics AdminState.)

Meaning:

I/O blade is undergoing a hard reset after leaving the Diagnostics

 

administrative state.

(C)(8400.0067) (Switch) (The switch is entering Diagnostics AdminState and will automatically hardreset and have the configured AdminState when leaving the Diagnostics AdminState.)

Meaning:

The switch is entering the Diagnostics state and will automatically

 

undergo a hard reset. The switch will return to the configured

 

administrative state after leaving the Diagnostics administrative

 

state.

(C)(8400.0068) (Switch) ( IOn) (Blade is entering Diagnostics AdminState and will automatically hardreset and have the configured AdminState when leaving the Diagnostics AdminState.)

Meaning:

The I/O blade is entering Diagnostics state and will automatically

 

undergo a hard reset. The I/O blade will return to the configured

 

administrative state after leaving the Diagnostics administrative

 

state.

59060-05 A

3-53

Page 67
Image 67
Q-Logic FIRMWARE VERSION 7.4 manual Switch New firmware has been installed