Q-Logic FIRMWARE VERSION 7.4 manual Event Log Message Format

A

2 – Events and Event Logging Displaying the Events Using the Command Line Interface

In the CLI, each message has the following format:

[ordinal][time_stamp][severity][source][message_ID][message_text]

	Table 2-2. Event Log Message Format
Component	Description
[ordinal]	A number assigned to each message in sequence since that last
	time the alarm history was cleared.
[time_stamp]	The time the alarm was issued in the format
	day-month-hh:mm:ss:ms-yyyy. This time stamp comes from the
	switch for events that originate with the switch, and from the
	workstation for events that originate from Enterprise Fabric Suite
	2007.
[severity]	The event severity: A–Alarm, C–Critical, W–Warning, I–Informa-
	tive.
[source]	The program module or application that generated the event.
	Sources include Zoning, Switch, PortApp, EPort, Management
	Server. Alarms do not include the source.
[message_ID]	A number that identifies the message using the following format:
	category.message_number
[message_text]	The alarm message text

Here is a sample of an informative-level message from the Switch source:

[1][Wed May 26 12:30:29.965 UTC 2004][I][8400.0022][Switch][Successful login user (snmp@IB-session6) with admin privilege]

For more information about the CLI commands, refer to the Command Line Interface Guide for your switch.

59060-05 A 2-3