Q-Logic FIRMWARE VERSION 7.4 manual A1004.0008 Eport Isolating due to ELP Incompatibility

3 – Event Messages Alarm Events

S

(A1003.0069) (Failing remote zoning configuration, invalid zone data received)

Meaning:	Zoning activation failed because the switch detected invalid zoning
	data that is not supported in the local interop mode.
Action:	Check your zoning configuration and remove incompatible zone
	members.

(A1004.0001) (Port in active hard zone, but not installed or present on this switch.)

Meaning:	A zone member in an ACL zone on this switch is defined with an
	invalid port number.
Action:	Examine the fabric and correct the zone membership.

(A1004.0005) (No communication from neighbor switch on port port_number with domain ID domain_ID, lost route)

Meaning:	This switch has not received a hello from the remote switch for 80
	seconds. The routes learned through this link are discarded.
Action:	None

(A1004.0008) (Eport Isolating due to ELP Incompatibility)

Meaning:	An E_Port isolated due to an ELP (Exchange Link Parameter)
	incompatibility.
Action:	Review the accompanying alarms for a specific cause.

(A1004.0009) (Eport Isolating due to ESC Incompatibility)

Meaning:	An E_Port isolated because the connecting switch failed to support
	the standard routing protocol FSPF.
Action:	Connect a compatible switch.

(A1004.000A) (Eport Isolating due to EFP Domain Overlap)

Meaning:	An E_Port isolated because each fabric has a switch with the same
	domain ID.
Action:	Change the domain ID on one of the conflicting switches.

(A1004.000B) (Eport Isolating due to Switch Administratively Offline)

Meaning:	An E_Port isolated because the local switch has been placed
	offline.
Action:	Configure the administrative state to Online to establish the link.

3-14 59060-05 A