Q-Logic FIRMWARE VERSION 7.4 manual A1007.0001 Security Unspecified zoning enforcement error

3 – Event Messages Alarm Events

S

(A1006.0006) (Zoning conflict, device_WWN and device_WWN do not share an ACL hard zone, but device_WWN share a soft zone)

Meaning:	The named zone members cannot communicate because they are
	members of different ACL hard zones.
Action:	Place both zone members in the same ACL hard zone or exclude
	both from ACL hard zones.

(A1007.0001) (Security: Unspecified zoning enforcement error)

Meaning:	A device was not authorized or it failed security checks and will not
	be allowed to join the fabric.
Action:	None

(A1007.0002) (Security: Remote Switch with WorldWide Name (WWN) wwn configured for chap, no chap configured for local switch. 2-way Authentication Failure)

Meaning:	The device WWN is either not configured in the security database,
	or it is not configured for Challenge Handshake Authentication
	Protocol (CHAP).
Action:	Add the device WWN to the active security set if it missing, or
	modify the group to allow for CHAP authentication with the other
	devices.

(A1007.0005) (Security: Authentication request was rejected by port.)

Meaning:	Indicates that a remote switch rejected a security authentication
	attempt. The port will isolate.
Action:	Checks the security configuration on the remote switch to
	determine the problem.

(A1007.0006) (Security: Could not validate Authentication Response from port_number, payload seems to be incorrect.)

Meaning:	The format of the payload of the response frame does not match
	what was expected.
Action:	Check for errors on the remote side of the link. Check the
	transceiver and cable. Update firmware on remote switch.

(A1007.0007) (Security: Fabric Binding (ESA) not supported on remote switch and Fabric Binding is enabled, failing security checks)

Meaning:	Either fabric binding is not enabled on the remote switch or the
	remote switch does not support security at all.
Action:	Check the security configuration on the remote switch.

3-32 59060-05 A