A

3 – Event Messages Alarm Events

(A1005.0099) (Canceling IPsec edit mode as a result of a CPU switchover)

Meaning:

A CPU switchover occurred while an Ipsec Edit session was in

 

progress. The edit session was canceled.

Action:

Open another Ipsec Edit session.

(A1005.0101) (ipv6: duplicate address detected)

Meaning:

Another IP version 6 system on the local network is using the same

 

address as this switch.

Action:

If the discovery method is static, assign a different IP version 6

 

address, or disconnect the device that is using the same address.

(A1005.009B) (IPSec configuration error: error_description)

Meaning:

An error occurred while saving changes to an IP Security

 

configuration. None of the configuration modifications have been

 

applied to the switch’s active database.

Action:

Resolve any other IP Security alarms. If this alarm persists, contact

 

your authorized maintenance provider.

(A1005.009C) (IPSec configuration error: Association assocation_name : error_description

Meaning:

An error occurred affecting the specified association while saving

 

the IP Security configuration. The association has not been applied

 

to the active database.

Action:

Redo modifications to the association and save it.

(A1005.009D) (IPSec configuration error: Policy policy_name : reason)

Meaning:

An error occurred affecting the specified policy while saving the IP

 

Security configuration. The policy has not been applied to the

 

active database.

Action:

Redo modifications to the policy and save it.

(A1006.0004) (Zoning conflict, device_WWN is in an ACL hard zone, but device_WWN share a soft zone)

Meaning:

The named zone members cannot communicate because they are

 

members of different ACL hard zones.

Action:

Place both zone members in the same ACL hard zone or exclude

 

both from ACL hard zones.

(A1006.0005) (Zoning enforcement error in Nameserver)

Meaning:

An error occurred while checking ACL zoning.

Action:

Contact your authorized maintenance provider.

59060-05 A

3-31

Page 45
Image 45
Q-Logic FIRMWARE VERSION 7.4 A1005.0101 ipv6 duplicate address detected, A1006.0005 Zoning enforcement error in Nameserver