Q-Logic FIRMWARE VERSION 7.4 manual Alarm SET

A

3 – Event Messages Alarm Events

(A2000.0004)	(power_supply_number AC power may be unplugged or switched off -
	ALARM SET)
	Meaning:	One of the two power supplies is not receiving power.
	Action:	Check the switch power supply and the AC power source.
(A2001.0001)	(Pwr2 was installed - ALARM CLEARED)
	Meaning:	Power supply #2 was installed.
	Action:	None
(A2001.0002)	(Pwr1 OK - ALARM CLEARED)
	Meaning:	Power supply OK.
	Action:	None
(A2001.0004)	(power_supply_number AC power is good - ALARM CLEARED)
	Meaning:	AC power has been restored.
	Action:	None
(A2002.0001)	(fan_number was removed)
	Meaning:	A field replaceable fan was removed from the switch.
	Action:	Reinstall the fan.
(A2002.0002)	(Fan fan_blade failure - ALARM SET)
	Meaning:	A cooling fan has failed.
	Action:	Replace the fan if it is a customer replaceable unit. Otherwise,
		contact your authorized maintenance provider.
(A2002.0003)	(Fan or power supply flow mismatch - ALARM SET)
	Meaning:	The switch has two cooling fans with opposite air flow directions.
	Action:	Replace one of the fans with another fan with the correct air flow
		direction.
(A2003.0001)	(fan_blade inserted - ALARM CLEARED)
	Meaning:	The switch fan blade has been installed and the alarm is cleared.
	Action:	None
(A2003.0002)	(fan_blade OK - ALARM CLEARED)
	Meaning:	The switch fan blade is operational and the alarm is cleared.
	Action:	None

59060-05 A 3-41