Q-Logic FIRMWARE VERSION 7.4 manual A1005.0074 Blade seating is questionable

3 – Event Messages Alarm Events

S

(A1005.0074)	(Blade seating is questionable)
	Meaning:	A SANbox 9000 blade is improperly installed.
	Action:	Examine the switch and reinstall blades as needed.
(A1005.0075)	(Blade seating problem was resolved)
	Meaning:	The SANbox 9000 blade seating problem as resolved.
	Action:	None
(A1005.0076)	(Extraction latch is open)
	Meaning:	A SANbox 9000 blade latch is open.
	Action:	Examine the switch and close open latches.
(A1005.0077)	(Extraction latch was closed)
	Meaning:	The SANbox 9000 blade latch has been closed.
	Action:	None
(A1005.0078)	(Extraction latch ignored until hotreset completes)
	Meaning:	Extraction latch was opened while a switch hot reset was in
		progress.
	Action:	Return the extraction latch to the closed position. Wait until the hot
		reset is complete, then remove the blade.

(A1005.0079) (Blade fault fault reported from primary CPU, resetting switch)

Meaning:	A blade fault has occurred on the SANbox 9000 primary CPU
	blade and the switch is resetting.
Action:	Contact your authorized maintenance provider.

(A1005.007A) (Blade fault fault reported from primary CPU, powering off blades/ports)

Meaning:	A blade fault has occurred on the SANbox 9000 primary CPU
	blade. I/O blades are being powered down.
Action:	Contact your authorized maintenance provider.

(A1005.007C) (Secondary CPU's latch is closed so now able to become Fault Tolerant)

Meaning:	The SANbox 9000 secondary CPU blade latch has been closed;
	the switch is now fault tolerant.
Action:	None

(A1005.007D) (Canceling callhome edit mode as a result of a CPU switchover)

Meaning:	A CPU blade switchover occurred while a CallHome Edit session
	was open. The CallHome Edit session was canceled.
Action:	Reopen the CallHome Edit session.

3-30 59060-05 A