Q-Logic FIRMWARE VERSION 7.4 manual A1005.0013 Hotswap procedure failed must hardreset switch

3 – Event Messages Alarm Events

S

(A1005.000E) (Configuration error, can't extend credit on loop capable ports. Extended credit not granted for port: port_number)

	Meaning:	Loop ports cannot borrow credits from the credit pool.
	Action:	Change the port type to G_Port or F_Port.
(A1005.0013)	(Hotswap procedure failed - must hardreset switch)
	Meaning:	The blade hot-swap procedure failed or the procedure was not
		followed correctly.
	Action:	Perform a hard reset.
(A1005.0020)	(Warning - development logging is enabled)
	Meaning:	Development logging is enabled.
	Action:	Contact your authorized maintenance provider.

3(A1005.0024) (Switch must be reset after leaving the Diagnostics Admin State)

Meaning:	After changing the switch administrative state from Diagnostics to
	any other state, the switch must be reset to complete the state
	change.
Action:	Reset the switch.

(A1005.0034) (System resource error - contact technical support)

Meaning:	There is a system resources problem on the switch.
Action:	Contact technical support.

(A1005.0035) (System resource error - contact technical support)

Meaning:	There is an internal problem on the switch.
Action:	Contact technical support.

(A1005.0036) (Hotswap procedure failed before last reset - must hardreset switch)

Meaning:	The blade hotswap procedure failed and the switch was reset
	without a power-on self test.
Meaning:	Reset the switch with a hard reset.

(A1005.0037) (Hotswap procedure never completed - the blade will not be functional until the switch is hardreset)

Meaning:	The blade hot-swap procedure was not completed.
Action:	Reset the switch with a hard reset.

(A1005.0038) (Switch incompatibility error - contact technical support)

Meaning:	Switch incompatibility error.
Action:	Contact technical support.

3-22 59060-05 A