Q-Logic FIRMWARE VERSION 7.4 manual Event Messages, Fault Events

3 Event Messages

This section lists event messages from the command line interface and Enterprise Fabric Suite 2007 in message ID sequence by the following severity levels:

„Fault Events

„Alarm Events

„Critical Events

„Warning Events

„Informative Events

You can look up a message by its message ID or by searching for the message text. If the message you are looking for does not appear in this section, contact your authorized maintenance provider.

Fault Events

The following fault messages apply only to SANbox 9000 series switches. Fault events, like alarms, require administrator attention and may require assistance from your authorized maintenance provider.

AC_FAULT
Meaning:	AC power may be unplugged or switched off.
AUX_PORT_ERROR
Meaning:	At least one internal FC link is not functional.
FAN_FAULT_DETECTED
Meaning:	Fan blade reports an internal fault.
FAN_FLOW_MISMATCH
Meaning:	Incompatible air flow directions (FAN0, FAN1, PS0, PS1)
FAN0_MISSING
Meaning:	FAN0 is not installed.

59060-05 A 3-1