Q-Logic FIRMWARE VERSION 7.4 manual A1007.0033 Device deviceWWN failed port binding

A

3 – Event Messages Alarm Events

(A1007.0030) (Security protocol not using chap, unable to authenticate.)

Meaning:	A Challenge Handshake Authentication Protocol (CHAP) negotiate
	frame was received that specifies an unsupported Diffie-Helmann
	(DH) group type.
Action:	Check the remote device for a possible error condition. Reset the
	port. If errors continue, disable CHAP for this device if it belongs in
	the fabric.

(A1007.0031) (Security protocol not using chap, unable to authenticate.)

Meaning:	A Challenge Handshake Authentication Protocol (CHAP) negotiate
	frame was received that specified an unsupported hashing
	algorithm or an algorithm that is not allowed for this security
	member's configuration.
Action:	Check the remote device for a possible error condition. Reset the
	port. If errors continue, disable CHAP for this device if it belongs in
	the fabric.

(A1007.0032) (Fabric conditions or configurations do not currently allow for changing fabric binding.)

Meaning:	An attempt to change the fabric binding setting was rejected due to
	current fabric binding configuration settings within the active
	security set.
Action:	Check fabric binding settings and the domain IDs of the switches
	within the fabric. Add missing switches to the ISL group of the
	active security set.
(A1007.0033) (Device device_WWN failed port binding.)
Meaning:	A device attempted fabric login (FLOGI), but that device was not
	configured in the port binding list for the specified port.
Action:	Add the device to the port binding list.
(A1007.0034) (Device device_wwn failed switch binding.)
Meaning:	A device attempted fabric login (FLOGI), but that device was not
	configured in the switch binding list for the specified switch.
Action:	Add the device to the switch binding list.

(A1007.0035) (Port taken offline due to switch binding failure following configuration change.)

Meaning:	A configuration change was made to the switch binding list such
	that the device(s) on the port were no longer allowed to be logged
	in.
Action:	Add the devices to the switch binding list.

59060-05 A 3-39