Q-Logic FIRMWARE VERSION 7.4 manual Informative Events, 8F00000E Link Status status

Models: FIRMWARE VERSION 7.4

1 84
Download 84 pages 32.06 Kb
Page 78
Image 78

3 – Event Messages Informative Events

S

(W) (8F00:000E) (Link Status status)

Meaning:

The severity of the link status has changed. The description field

 

will show the reason for link status.

Informative Events

Informative events are events that occur in the normal activities of a fabric. The following lists the event ID and text of the message along with an explanation of the message.

(I) (8200.0001) (mserver) (Hotreset is not permitted at this time, try again later)

Meaning:

The switch was busy at the time of the attempted hot reset. Try the

 

hot reset again later.

(I)(8200.0002) (mserver) (Port: port_number) (Rejecting request from address FC_address, inband management is disabled on port port_number)

Meaning:

A Management Server command was received on a port that is

 

configured to refuse inband management requests.

(I)(8200.0100) (mserver) (Cannot map number_of_characters characters to Switch Symbolic Name (max number_of_characters))

Meaning:

The RIELN management server command was processed, and the

 

Interconnect Element Logical Name was registered. However, the

 

registered name is of greater length than the maximum length

 

allowed for the Switch Symbolic Name, so therefore the Switch

 

Symbolic Name was not changed to match the registered name.

(I) (8200.0101) (mserver) (Cannot map non-printable characters to Switch Symbolic Name)

Meaning:

The RIELN management server command was processed, and the

 

Interconnect Element Logical Name was registered. However, the

 

registered name contains unprintable characters. These characters

 

are not allowed for the switch symbolic name, therefore the switch

 

symbolic name was not changed to match the registered name.

(I)(8200.0200) (mserver) (Rejecting request (GZM) for zone zone_name containing unsupported alias member(s)

Meaning:

The fabric zone server command GZM (Get Zone Member) was

 

rejected because the requested zone member was an alias that is

 

not defined in Fibre Channel General Services-3 (FC-GS-3).

3-64

59060-05 A

Page 78
Image 78
Q-Logic FIRMWARE VERSION 7.4 manual Informative Events, 8F00000E Link Status status