Q-Logic FIRMWARE VERSION 7.4 manual A1003.0010 Segmenting, zoneset zonesetname not defined

A

3 – Event Messages Alarm Events

(A1003.0010) (Segmenting, zoneset zone_set_name not defined)

Meaning:	In non-interop mode, there is a conflict in the zoning configuration,
	causing the Inter-Switch Link (ISL) to isolate. The zone set is not
	found within the local zoning data base while interop mode is
	disabled.
Action:	Contact your authorized maintenance provider.

(A1003.0011) (Segmenting, zoneset zone_set_name already active)

Meaning:	In non-interop mode, there is a conflict in the zoning configuration,
	causing the Inter-Switch Link (ISL) to isolate. A switch tried to
	activate a zone set that is already active while interop mode is
	disabled.
Action:	Contact your authorized maintenance provider.

(A1003.0012) (Segmenting, zoneset zone_set_name merge conflict)

Meaning:	In non-interop mode, there is a conflict in the zoning configuration,
	causing the Inter-Switch Link (ISL) to isolate. After a zone merge
	with interop mode disabled, two zone sets were discovered in the
	local zoning database with the same name, but different
	membership.
Action:	Contact your authorized maintenance provider.

(A1003.0013) (Segmenting, zone zone_name merge conflict)

Meaning:	In non-interop mode, there is a conflict in the zoning configuration,
	causing the Inter-Switch Link (ISL) to isolate. After a zone merge
	with interop mode disabled, two zone were discovered in the local
	zoning database with the same name, but different membership.
Action:	Contact your authorized maintenance provider.

(A1003.0014) (Segmenting, alias alias_name merge conflict)

Meaning:	There is a conflict in the zoning configuration causing the
	Inter-Switch Link (ISL) to isolate. Two aliases with the same name
	but different membership were discovered in the local zoning
	database.
Action:	Reconcile the active zone sets so that the two aliases have
	identical membership.

(A1003.0015) (Zoneset Activation received from switch with domain domain_ID failed, unknown zoneset zone_set_name)

Meaning:	A zone set activation received from the named switch failed
	because the zone set was not in the zoning database.
Action:	Examine the named switch to verify that the zoning database is
	correct.

59060-05 A 3-5