Q-Logic FIRMWARE VERSION 7.4 manual A6001.0001 cmon insufficient memory

A

3 – Event Messages Alarm Events

(A3014.0003) (IOn) (Blade blade_ID set Down due to the configured blade type not matching the installed blade)

Meaning:	The I/O blade given by blade_ID has isolated because the
	operational blade type does not match the configured blade type.
Action:	Change the configured blade type to match the I/O blade that is
	present, or insert an I/O blade of the configured blade type.

(A4000.0001) (threshold of value hit rising trigger trigger_number in value second window on port port_number - ALARM SET

Meaning:	The switch exceeded the specified threshold for the rising trigger in
	the specified sample window.
Action:	Investigate the specified port for problems or adjust the rising
	trigger or sample window.

(A6000.0002) (Configured port speed for port port_number not compatible with media.)

Meaning:	The transceiver in the named port is not capable of transmitting at
	the configured port speed.
Action:	Reconfigure the port speed or replace the transceiver.
(A6001.0001) (cmon: insufficient memory)
Meaning:	The Hotreset command has failed due to insufficient memory on
	the switch. The switch has been returned to its state before the
	Hotreset command was entered.
Action:	If acceptable, enter the Reset Switch command to reboot the
	switch. Contact technical support if a non-disruptive code load and
	activation is required.
(A6001.0002) (cmon: blade failed NDCLA)
Meaning:	The Non-Disruptive Code Load and Activation (NDCLA) has failed
	on this I/O blade.
Action:	None
(A6001.0003) (cmon: switch failed NDCLA)
Meaning:	The Non-Disruptive Code Load and Activation (NDCLA) has failed.
	The switch has performed a hard reset.
Action:	None
(A6001.0004) (cmon: Blade was removed during NDCLA)
Meaning:	An I/O blade was removed during the Non-Disruptive Code Load
	and Activation (NDCLA).
Action:	None

59060-05 A 3-45