Q-Logic FIRMWARE VERSION 7.4 manual A1003.0023 Fabric Busy Zoneset operation failed

A

3 – Event Messages Alarm Events

(A1003.0021) (Failing remote zoning configuration, Zoneset is empty)

Meaning:	An empty zone set was included as part of a zone merge and was
	rejected.
Action:	Modify the zoning database on the remote switch to remove or
	correct the empty zone set.

(A1003.0022) (Unable to update database with newly activated information, Zoning Save in Progress)

Meaning:	Modifications were being made to the security or zoning database
	while a security set or zone set was being activated or deactivated
	from a remote switch.
Action:	Try the activation or deactivation again later.
(A1003.0023) (Fabric Busy Zoneset operation failed)
Meaning:	The activation or deactivation of a zone set failed because the
	fabric is currently busy.
Action:	Try the activation or deactivation again later.
(A1003.0024) (Request already in progress (internal lock held))
Meaning:	A fabric operation is currently in progress.
Action:	Wait and try again.
(A1003.0025) (Error reading security set.)
Meaning:	There was a problem handling the activate direct management
	server command. The format of the command was not standard.
Action:	Check the security configuration.

(A1003.0028) (SFC failure received from remote switch with domain domain_ID)

Meaning:	The remote switch given by domain_ID rejected the Staged Fabric
	Configuration (SFC) message, so the SFC request has failed.
Action:	Check the status of the remote switch at the given domain ID.
	There could be an issue with the security configuration or the
	zoning configuration.

(A1003.0029) (No response received from switch with domain ID domain_ID)

Meaning:	The remote switch given by domain_ID did not reply to an Acquire
	Change Authorization (ACA) message, so the ACA request has
	failed.
Action:	Check the status of the remote switch at the given domain ID.
	There could be an issue with the security configuration or the
	zoning configuration.

59060-05 A 3-7