Q-Logic FIRMWARE VERSION 7.4 manual Authorized maintenance provider

3 – Event Messages Alarm Events

S

(A1004.0032) (E_Port not supported on remote port. Reconfigure remote switch to connect.)

Meaning:	An E_Port isolated because the port on the remote switch could
	not configure itself as an E_Port.
Action:	Change the port type on the remote switch to G_Port or GL_Port.

(A1004.0033) (Remote switch is in Interop mode or using Legacy Address Format)

Meaning:	A remote switch is attempting to connect with conflicting settings
	for Interop mode or legacy address format.
Action:	Configure the switches so that Interop mode and Legacy Address
	Format settings are the same throughout the fabric.

(A1004.0034) (Failed to connect to a switch due to incompatibility - contact technical support.)

Meaning:	The two switches are incompatible. Possible causes include
	incompatible interoperability mode configurations, incompatible
	firmware versions, and incompatible licensing.
Action:	Verify that the interoperability mode settings, firmware versions,
	and licensing on the remote switch are compatible. Otherwise,
	contact your authorized maintenance provider.

(A1004.0035) (Failed to connect to a switch due to incompatibility - check interop settings.)

Meaning:	The remote switch failed to connect possibly because the
	interoperability mode setting is different from that of the local
	switch.
Action:	Reconcile the interoperability mode settings on the local and
	remote switch so that they are the same. If necessary, contact your
	authorized maintenance provider.

(A1004.0036) (Domain ID domain_ID assigned to different switches. Cannot join fabrics.)

Meaning:	An attempt was made to join two fabrics that had switches with the
	same domain_ID.
Action:	Change the domain_ID on one of the switches so that it is unique,
	and then join the fabrics again.

(A1004.0037) (Fabric Binding Error - please reconfigure: Local switch assigned domain domain_ID which is locked, fabric binding indicates domain domain_ID should be used.)

Meaning:	The local switch has a conflicting domain ID and cannot be
	automatically reassigned because the domain ID is locked.
Action:	Change the domain ID of the local switch.

3-18 59060-05 A