Q-Logic FIRMWARE VERSION 7.4 manual A1004.0015 Eport Isolating due to Invalid Attach

3 – Event Messages Alarm Events

S

(A1004.0013) (Eport Isolating due to all switches incapable of becoming Principal Switch)

Meaning:	An E_Port isolated because the principal priority on all switches is
	set to 254.
Action:	Configure one of the switches to be the principal switch by
	changing the principal priority.

(A1004.0014) (Eport Isolating due to TOV mismatch indicated on ELP)

Meaning:	An E_Port isolated because the R_A_TOV or E_D_TOV time out
	values are different on the two switches.
Action:	Modify the switch configurations so that R_A_TOV or E_D_TOV
	values are the same.
(A1004.0015) (Eport Isolating due to Invalid Attach)
Meaning:	An E_Port isolated because of invalid attachment.
Action:	Check for invalid attachment due to security or authentication
	incompatibility.

(A1004.0020) (R_A_TOV mismatch indicated. Reconfigure to connect to remote switch.)

Meaning:	An E_Port isolated because the R_A_TOV timeout values on the
	two switches do not match.
Action:	Modify R_A_TOV so that it is the same on both switches. The
	recommended value is 10 seconds.

(A1004.0021) (E_D_TOV mismatch indicated. Reconfigure to connect to remote switch.)

Meaning:	An E_Port isolated because the E_D_TOV timeout values on the
	two switches do not match.
Action:	Modify E_D_TOV so that it is the same on both switches. The
	recommended value is 2 seconds.

(A1004.0023) (Attempting to connect to switch with incompatible time out value configured (R_A_TOV/E_D_TOV).)

Meaning:	An E_Port isolated because the values for R_A_TOV or E_D_TOV
	are not the same on both switches.
Action:	Modify the switches so that the time out values are the same.

(A1004.0024) (Attempting to connect to switch that is in non-interop mode)

Meaning:	An attempt was made to connect to a switch with a different value
	for Interop Mode.
Action:	Modify the Interop Mode values so that they are the same on both
	switches.

3-16 59060-05 A