Q-Logic FIRMWARE VERSION 7.4 manual A1007.0025 Security feature not supported

3 – Event Messages Alarm Events

S

(A1007.0020) (MAX Retry count reached on CHAP Authentication Protocol Reset, failing Authentication)

Meaning:	A Remote Authentication Dial In Service (RADIUS) server has
	rejected a RADIUS authentication request.
Action:	Check the configuration on both the switch and on the RADIUS
	server for incompatibilities.
(A1007.0021) (No response to RADIUS access request for device on port port)
Meaning:	A configured Remote Authentication Dial In Service (RADIUS)
	server did not respond to an authentication request within the
	timeout period.
Action:	Check RADIUS server configuration and the RADIUS server.

(A1007.0022) (Invalid response authenticator from RADIUS server IP_address:port, check shared secret)

Meaning:	There is a Remote Authentication Dial In Service (RADIUS) server
	configuration problem.
Action:	Check the shared secret. The shared secret must be configured on
	both the RADIUS server and the switch.

(A1007.0023) (Invalid response authenticator from RADIUS server IP_address:port, check

shared secret
Meaning:	There is a Remote Authentication Dial In Service (RADIUS)
	configuration problem.
Action:	Confirm that the shared secret configured on the switch is identical
	to the shared secret configured on the RADIUS server.

(A1007.0024) (Invalid access accept from RADIUS server IP_address:port, bad or missing

Service-Type)
Meaning:	A service-type Remote Authentication Dial In Service (RADIUS)
	attribute was not found in a RADIUS packet.
Action:	This is a RADIUS server configuration issue. Consult your RADIUS
	server documentation.
(A1007.0025) (Security feature not supported.)
Meaning:	The switch is coming out of Non-Disruptive Code Load and
	Activation (NDCLA) and had an active security prior to the NDCLA,
	but the security feature is no longer supported.
Action:	A license key may be required for the security feature.

3-36 59060-05 A