Q-Logic FIRMWARE VERSION 7.4 manual 8400.007C CPUn Switching over to Secondary bladeID

A

3 – Event Messages Critical Events

(C) (8400.007B) (Resaving the security config as a result of a CPU switchover)

Meaning:	A CPU blade switchover occurred while saving the security
	database. A save ‘retry’ will now occur.

(C) (8400.007C) (CPUn) (Switching over to Secondary blade_ID)

Meaning:	Control is transferring from the primary CPU to the specified
	secondary CPU blade.

(C)(8400.0080) (Switch) (blade_ID) (Blade fault blade_fault processing in progress, gathering support information...)

Meaning:	The system is gathering support information in response to the
	blade fault that occurred on the specified blade.
(C) (8400.008A) (A Zoning merge has occurred)
Meaning:	Two fabrics have been connected and their zoning databases have
	been merged.

(C)(8400.008D) (Illegal configuration detected based on licensing. Configuration will be updated.)

Meaning:	The restoration of a configuration backup has violated current
	feature licensing. The active configuration will be automatically
	updated based on current licensing.

(C) (8400.008E) (Inconsistent configuration defaults detected. Defaults will be updated.)

Meaning:	Two fabrics have been connected, and their zoning databases
	have been merged.

(C) (8400.008F) (Attempted speed licensed upgrade that is already enabled)

Meaning:	An attempt was made to install a license for a port speed that is
	already operable on the switch.

(C) (8400.0096) (Secondary CPU firmware update complete)

Meaning:	The update of the firmware image on the secondary CPU is
	complete.

(C)(8600.0009) (PortApp) (Port: port_number) (Link reset (LR) to be performed on port port_number.)

Meaning:	The port will perform a link reset (LR) due to a loss of credit
	problem.

(C)(8600.000A) (PortApp) (Port: port_number) (Link reset (LR) to be performed on port port_number.)

Meaning:	The port will perform a link reset (LR) due to a loss of credit
	problem.

59060-05 A 3-55