Q-Logic FIRMWARE VERSION 7.4 manual Switch Upgrading License for 4G capability

A

3 – Event Messages Critical Events

(C)(8400.0044) (Switch) (A reset is required since a Power On Self Test (POST) has never run on these ports)

Meaning:	After upgrading ports, it may be necessary to reset the switch so
	that the POST can run on the newly licensed ports.

(C) (8400.0045) (Switch) (Upgrading License for 4G capability)

Meaning:	Installation of the license key that grants 4-Gbps transmission
	speed capability to the Fibre Channel ports is in progress.

(C) (8400.0046) (Switch) (Upgrading License for multiple ISL capability)

Meaning:	The switch has been upgraded to allow for multiple inter-switch
	links.

(C) (8400.0047) (Switch) (New licenses are being installed

Meaning: New licenses are being installed.

(C)(8400.0049) (Switch) (The Configuration Wizard from ip_address is exiting - switch configuration may have changed)

Meaning:	Changes made to switch may result in loss of communication with
	the switch.

(C) (8400.004B) (Switch) (Attempted to license modes on an unsupported switch type)

Meaning:	An attempt was made to install a license key for a feature that is
	not supported on the switch.

(C)(8400.004C) (Switch) (Services setup is changing - may lose connection - admin being released automatically)

Meaning:	The Services configuration is changing and this may result in the
	loss of a connection.

(C) (8400.004D) (Switch) (ntpdate: no server suitable for synchronization found)

Meaning: The Network Time Protocol (NTP) server was not found.

(C) (8400.004E) (Switch) (ntpdate: synchronization lost)

Meaning: The Network Time Protocol (NTP) server synchronization was lost.

(C)(8400.0050) (Switch) (Upgrading License allowing manufacturing setup mode capability)

Meaning: The license upgrade was successful.

(C) (8400.0052) (Switch) (Upgrading License for EFCM capability)

Meaning: The license upgrade was successful.

59060-05 A 3-51