Q-Logic FIRMWARE VERSION 7.4 manual A1003.0064 UFC failure received from domain domainID

Models: FIRMWARE VERSION 7.4

1 84
Download 84 pages 32.06 Kb
Page 27
Image 27

A

3 – Event Messages Alarm Events

(A1003.0058) (Active ZoneSet zone_set no longer in database, please deactivate zoneset if not already in progress or fabric will be inconsistent)

Meaning:

A zone set with the same name as the current active zone set no

 

longer resides in the zoning database. The active zone set will not

 

be added to the full zone set sequence to prevent inconsistency in

 

the zoning database.

Action:

Deactivate the active zone set to keep the fabric consistent.

(A1003.0059) (Failing remote zoning configuration, zone member type not supported)

Meaning:

A remote switch's zoning configuration contains a zone member

 

type that is not supported.

Action:

Edit the zone to remove the unsupported member type.

(A1003.0060) (Zone Merge conflict (Alias mismatch for alias= alias, check members)

Meaning:

The zone merge failed due to an alias mismatch.

Action:

Examine the zoning configuration for conflicts.

(A1003.0062) (Failing delete orphans zoning request, fabric locked by switch with domain ID domain_ID. Retry command later.)

Meaning:

An attempt was made to delete the orphan zones while the fabric

 

was locked.

Action:

Retry the command later.

(A1003.0063) (Failing delete orphans zoning request, fabric busy. Retry command later.)

Meaning:

An attempt was made to delete the orphan zones while the fabric

 

was busy.

Action:

Retry the command later.

(A1003.0064) (UFC failure received from domain domain_ID)

Meaning:

An Update Fabric Configuration (UFC) message was received with

 

a failed status from the switch given by domain_ID.

Action:

Check the status of the switch at the given domain ID.

(A1003.0066) (ISL group entry for switch wwn does not contain valid binding configuration. Entry should have binding domain domain_ID)

Meaning:

A switch in the fabric is using a domain ID that differs from the

 

configured fabric binding domain ID.

Action:

Change either the current switch domain ID or the fabric-binding

 

domain ID so that they match.

59060-05 A

3-13

Page 27
Image 27
Q-Logic FIRMWARE VERSION 7.4 manual A1003.0064 UFC failure received from domain domainID