Q-Logic FIRMWARE VERSION 7.4 manual A1004.0041 Eport isolating due to EPort License Exceeded

A

3 – Event Messages Alarm Events

(A1004.0038) (WorldWide Name (WWN) device_WWN assigned domain domain_ID, fabric

binding indicates this domain is reserved for device_WWN.)

Meaning:	The user-activated fabric binding conflicts with the current domain
	ID assignment.
Action:	Change the domain ID of the device.

(A1004.0039) (WorldWide Name (WWN) device_WWN currently in fabric, no fabric binding in active security set for this WWN.)

Meaning:	Fabric binding failed due to security incompatibility.
Action:	Check the security settings of the named device.

(A1004.003F) (Request for Domain ID rejected, WorldWide Name (WWN) device_WWN not allowed to join fabric.)

Meaning:	The switch with the specified WWN is not allowed to join the fabric.
Action:	Add the switch to a group in the active security set.

(A1004.0040)	(World Wide Name (WWN) device_WWN assigned domain domain_ID, fabric
	binding indicates it should use domain_ID.)
	Meaning:	A fabric binding configuration was activated that conflicts with the
		current domain ID assignment.
	Action:	Change the domain ID of the named device, and then reconfigure
		the fabric.
(A1004.0041)	(Eport isolating due to E_Port License Exceeded.)
	Meaning:	An E_Port isolated because all licensed E_Ports are in use.
	Action:	Obtain a license key to license additional E_Ports.

(A1004.0043) (Forcing Domain ID change due to Interoperability setting from old_domain_ID to new_domain_ID.)

Meaning:	The Domain ID of the switch is changed due to an interoperability
	configuration change. The old Domain ID does not conform to the
	range of allowed Domain IDs for the new interoperability setting.
Action:	None

(A1004.0048) (Eport Isolating due to Port Binding failure)

Meaning:	A switch device attempted to login as an Inter-Switch Link (ISL),
	but that device was not configured in the port binding list.
Action:	Add the device to the port binding list.

59060-05 A 3-19