HP StoreServ Application Suite for Microsoft Hyper-V E-Media manual Select-HyperV, Set-RmhPolicy

Select-HyperV

Select-HyperVselects a Hyper-V host/cluster previously added to a user profile.

Preconditions

•User must first login using Login-Rmh.

•User must first Add-Hypervused in Select-Hyperv.

Syntax

Any optional parameters require square brackets [ ] around them.

Select-HyperV -RmhServerName <RmhServerName> -HypervName <HypervName> [-Verbose]

Table 52 Select-HyperVparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address
-HypervName	Required	Select Hyper-V host/cluster to use by
		default. This is FQDN or IP address.
		Synonyms for Hyper-V are supported.
		The localhost is not supported.
-Verbose	Optional	Display progress messages.

Success Paths

•Scenario 1: Hyper-V is selected. Specified Hyper-V is selected.

Failure Paths

•Scenario 1: Session owner is invalid.

Every session command received on RMH Server is validated to originate from the same IP address that initiated the session. If IP does not match, the command fails.

•Scenario 2: Hyper-V host/cluster name is not specified. Hyper-V host/cluster name must be specified.

•Scenario 3: Hyper-V host/cluster name is not available for user. Add-Hyperv must be issued to associate Hyper-V first.

•Scenario 4: Cannot communicate with specified Hyper-V host/cluster.

Cannot communicate with Hyper-V specified. Host is unavailable. Invalid credentials specified.

•Scenario 5: Cannot communication with Storage System(s) associated with Hyper-V. Cannot communicate with associated Storage System(s).

Set-RmhPolicy

Set-RmhPolicymodifies RMH policy of a VM.

Preconditions

User must first login using Login-Rmh.

82 HP 3PAR Recovery Manager for Microsoft Hyper-V Powershell Commands